• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If you have double glazed window repairs-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier, UPVC Window Repairs preventing any intruders to gain access to your home. If the gap is large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. As time passes, they may develop a variety of issues such as sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze it could be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is an easy process but it can be easier if you have someone to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also crucial to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come an point at which it is more efficient to replace them than repair them. If you encounter any issues with your Upvc window you should consult a professional as soon as possible.